Skip to content
Quote
Menu

EU market · EN 13501-1

Euroclass B-s1,d0 MDF

B-s1,d0 is an EN 13501-1 reaction-to-fire class. Suitability depends on product identity, thickness, mounting, air gap and surface condition stated in the classification report — not on a generic “fire MDF” label.

Configure FR MDF enquiry Request quotation

Buyer answer

Euroclass B-s1,d0 under EN 13501-1 is the reaction-to-fire route typically specified for EU commercial interiors and many export projects that follow European classification. The letters describe contribution to fire (B), smoke production (s1) and flaming droplets/particles (d0) for the tested product and mounting — not a universal approval for every thickness or finish in a catalogue.

Share the named EN class from the written specification, the thickness and surface condition you will install, and any mounting or air-gap requirements. We match the offered board and current classification report before quotation; we do not treat Euroclass as equivalent to ASTM E84 Class A, BS, GB or blanket Civil Defense acceptance.

What to confirm from the report

  • Classification result (B-s1,d0 or the exact class named in the project)
  • Product identity, thickness and density covered by the classification
  • Mounting method, substrate and air gap recorded in the report
  • Surface condition — raw, coated, veneered or laminated — inside the tested scope
  • Validity window and whether the report applies to the offered production route

Verification rule: A fire class or certificate applies only to the identified board, thickness, density, finish and tested assembly. Current evidence must be matched before quotation or submission. EN 13501-1 Euroclass B-s1,d0 is not interchangeable with ASTM E84 Class A or other national systems.

Specification and document matrix

Euroclass EN 13501-1 B-s1,d0 target route; current classification report required for the offered SKU.
Density Confirmed from the current TDS for the offered SKU.
Thickness Matched to application, production range and document scope (commonly 18 mm for commercial joinery — confirm).
Sizes Standard or project format subject to mill, trim and loading checks (e.g. 1220×2440 / 1220×3050 mm where available).
Formaldehyde E0, E1, CARB Phase 2 or TSCA Title VI only when supported by the offered product evidence.
FSC FSC supply option subject to valid Chain-of-Custody scope and claim on the order.
MOQ Confirmed by thickness, size, treatment, finish and mill schedule.
Container loading Calculated from dimensions, density, pack geometry, payload and destination limits.
Lead time Confirmed after specification, documents, quantity and production slot are agreed.

Where buyers use B-s1,d0 FR MDF

  • Public interiors — wall and joinery packages where the EU specification names EN 13501-1 B-s1,d0.
  • Hospitality joinery — hotel and F&B fit-out components reviewed against the classification report scope.
  • Acoustic wall panels — perforation and finish can affect the final construction; confirm machining with a trial where needed.

For board selection, sheet sizes, document checklist and the project configurator, use the main Fire Rated MDF product page.

Confirm before quotation

  • Which EN 13501-1 class is written in the specification (B-s1,d0 or other)?
  • Raw, coated, veneered or laminated — and is that surface in the report?
  • What mounting / air gap does the project use?
  • Which thickness, sheet size, quantity and documents are required for the destination market?

Related standards: Need ASTM E84 Class A for US projects? ASTM and Euroclass are separate systems — state the named route. Return to the Fire Rated MDF product page to configure standard, thickness, size, quantity, destination and documents.

WhatsApp