Skip to content
Quote
Menu


PANELTIVA · PARTICLE BOARD · PB

Particle Board for Furniture, Cabinets & Door Core Applications

Particle board supply for furniture production, cabinet components, laminated panels and 33 mm / 44 mm door-core requirements — matched to the application, construction, processing and destination-market documentation.






Specification confirmation matters. Thickness, density profile, core construction, internal bond, screw holding, surface and supporting documents are confirmed against the exact product route, quantity and end use. A 33 mm or 44 mm board does not by itself establish a certified fire-door rating.

APPLICATIONS

Particle board routes for furniture, doors and interior production

Select the construction around the finished component, processing method, face material and required performance.

Particle board components for furniture and cabinet production

Furniture & cabinetry

For cabinet carcasses, shelving, RTA furniture and repeat-production components requiring consistent machining.

Particleboard door core for flush and interior door manufacturing

33 mm & 44 mm door cores

Solid or tubular particleboard routes for flush and interior doors, subject to construction and performance confirmation.

Particle board substrate for decorative lamination

Decorative lamination

Raw substrate for melamine paper, veneer, HPL or CPL where surface and bonding requirements are agreed.

Particle board for joinery and commercial fit-out components

Joinery & fit-out components

For interior fixtures and project components requiring coordinated formats, processing and documentation.

PRODUCT & PROCESSING GUIDANCE

Specify the board around the finished component

Particle board performance depends on its construction, density profile, face material, machining, edge treatment and installation—not thickness alone.

Machining & fixingConfirm drilling, routing, screw-holding and edge-fastening requirements against the offered grade.
Surface & bondingTrial the intended melamine, veneer, HPL, CPL or door-skin bonding process before repeat production.
Door-core constructionConfirm solid or tubular structure, thickness, door-skin build-up, lipping, hardware and finished-door requirement together.
Production approvalUse a product or assembled-component sample to review machining, bonding and finished performance before volume orders.
Particle board machining and component production
Board construction, processing and final assembly should be reviewed as one specification.

PRODUCT QUALIFICATION

Confirm the right production route before ordering

Technical properties are product-specific. Density, internal bond, screw holding and dimensional tolerance should be taken from the data for the offered construction and thickness.

Board construction

Confirm furniture-grade, solid door-core or tubular door-core construction against the application.

Thickness & format

Furniture formats and 33 mm / 44 mm door-core sizes should be verified with packing and loading requirements.

Emission requirement

Match E1, E0, CARB P2 / TSCA Title VI or another requirement to the exact supply route and destination.

Performance documents

Fire, acoustic or other door performance must be supported by the applicable tested assembly and documentation.

TECHNICAL DATA & DOCUMENTATION

Technical & Compliance Documents

Select the documents relevant to your specification. Product-specific documents are reviewed against the offered grade, construction and order requirements before release.

Select requested documents



Select one or more documents to continue.

BUYER FAQ

Questions to resolve before ordering

What is the difference between particle board and MFC?

Particle board describes the substrate. MFC is particle board faced with melamine decorative paper. This page covers raw particle board and door-core routes; decorative MFC options should be specified separately.

Are 33 mm and 44 mm boards intended for door production?

These thicknesses are commonly considered for solid or tubular door-core applications. The correct construction and size depend on the door build-up, skins, lipping, hardware and finished performance requirement.

Does a 44 mm particleboard core make a certified fire door?

No. A fire rating belongs to a tested doorset or door-leaf assembly. The core, skins, framing, seals, glazing and hardware must match the relevant evidence and specification.

Can particle board be laminated with melamine, veneer, HPL or CPL?

Yes, subject to the substrate surface, bonding system and production process. A lamination trial is recommended before repeat production.

Can FSC and emission documents be supplied?

Document availability is confirmed against the exact product, production source, order and destination. Select the required documents above for review.

Can I request a sample or door-core trial board?

Yes. Send the intended construction, thickness, size, face material and application so the relevant sample route can be reviewed.

Need Help With Your Particle Board Requirement?

Share your application, construction, dimensions and destination. Our team can help review a suitable furniture-board or door-core route, sample, documentation and pricing.


WhatsApp