Skip to content
Quote
Menu

Buyer guide

What Density MDF Is Best for CNC Routing?

A useful starting range is 740–760 kg/m³ for many deep-routing and profiling jobs, but density alone does not predict a clean edge. Internal bond, through-thickness density, fibre refinement, tool condition and feed must be tested together.

Short answer

A useful starting range is 740–760 kg/m³ for many deep-routing and profiling jobs, but density alone does not predict a clean edge. Internal bond, through-thickness density, fibre refinement, tool condition and feed must be tested together.

Decision table

Starting density 740–760 kg/m³ as a process starting point, subject to thickness and SKU trial.
Typical thickness 16 / 18 / 25 mm.
Also check Internal bond, core profile, moisture, fibre structure and thickness tolerance.
Trial Route the deepest profile and smallest radius using production tooling.

How to decide

  1. Define the final profile and minimum remaining section.
  2. Record cutter, RPM, feed, pass depth and extraction.
  3. Compare edge fuzz, breakout, sanding time and primer build.

What buyers often miss

A high face density can hide a weaker core that becomes exposed during deep routing.

Evidence rule: Publish the exact SKU values only after TDS and production-trial confirmation.

WhatsApp