Skip to content
Quote
Menu

Buyer guide

Why Does MDF Become Rough After CNC Routing?

MDF becomes rough when routing exposes coarse or weak core fibres and the cutting conditions tear rather than shear them. Board structure, internal bond, tool sharpness, RPM, feed and cut depth all contribute.

Short answer

MDF becomes rough when routing exposes coarse or weak core fibres and the cutting conditions tear rather than shear them. Board structure, internal bond, tool sharpness, RPM, feed and cut depth all contribute.

Decision table

Board causes Coarse fibre, low/variable core density, weak internal bond or unsuitable moisture.
Tool causes Dull cutter, wrong geometry, excessive projection or vibration.
Process causes Feed/RPM mismatch, deep single pass, poor extraction or climb/conventional strategy.
Finish effect Fuzzy edges absorb more sealer and increase sanding/primer cycles.

How to decide

  1. Keep one production pattern as the comparison coupon.
  2. Hold tool and machine settings constant when comparing boards.
  3. Measure fuzz, breakout, cycle time, sanding and coating consumption.

What buyers often miss

A real customer-case module is reserved here; case values will be added only after the board SKU, tool, settings, profile and before/after result are documented.

Evidence rule: Do not attribute improvement to density alone without a controlled comparison.

WhatsApp